Cisco Training


CCNA®: Cisco Certified Networking Associate Certification Training (EXAM 200-120 or 100-101 and 100-101)

Cisco Certified Network Associate (CCNA) Routing and Switching is a certification program for entry-level network engineers that helps maximize your investment in foundational networking knowledge and increase the value of your employer’s network. CCNA Routing and Switching is for Network Specialists, Network Administrators, and Network Support Engineers with 1-3 years of experience. The CCNA Routing and Switching validates the ability to install, configure, operate, and troubleshoot medium-size routed and switched networks.

ICND1: Interconnecting Cisco Network Devices (EXAM 100-101)

Module 1: Building a Simple Network
a.Lesson 1: Exploring the Functions of Networking
b.Lesson 2: Understanding the Host-to-Host Communications Model
c.Lesson 3: Introducing LANs
d.Lesson 4: Operating Cisco IOS Software
e.Lesson 5: Starting a Switch
f.Lesson 6: Understanding Ethernet and Switch Operation
g.Lesson 7: Troubleshooting Common Switch Media Issues

Module 2: Establishing Internet Connectivity
a.Lesson 1: Understanding the TCP/IP Internet Layer
b.Lesson 2: Understanding IP Addressing and Subnets
c.Lesson 3: Understanding the TCP/IP Transport Layer
d.Lesson 4: Exploring the Functions of Routing
e.Lesson 5: Configuring a Cisco Router
f.Lesson 6: Exploring the Packet Delivery Process
g.Lesson 7: Enabling Static Routing
h.Lesson 8: Managing Traffic Using ACLs
i.Lesson 9: Enabling Internet Connectivity

Module 3: Managing Network Device Security
a.Lesson 1: Securing Administrative Access
b.Lesson 2: Implementing Device Hardening
c.Lesson 3: Implementing Traffic Filtering with ACLs

Module 4: Building a Medium-Sized Network
a.Lesson 1: Implementing VLANs and Trunks
b.Lesson 2: Routing Between VLANs
c.Lesson 3: Using a Cisco Network Device as a DHCP Server
d.Lesson 4: Introducing WAN Technologies
e.Lesson 5: Introducing Dynamic Routing Protocols
f.Lesson 6: Implementing OSPF

Module 5: Introducing IPv6
a.Lesson 1: Introducing Basic IPv6
b.Lesson 2: Understanding IPv6
c.Lesson 3: Configuring IPv6 Routing

Module 6: ICND1 Superlab
a.Lab S-1: ICND1 Superlab
b.Task 1: Configure Basic Settings, VLANs, Trunks, and Port Security on Switches
c.Task 2: Configure Inter-VLAN Routing
d.Task 3: Configure Internet Connectivity
e.Task 4: Configure WAN Connectivity and a Dynamic Routing Protocol
f.Task 5: Configure IPv6 Connectivity in the LAN
g.Task 6: Configure the OSPFv3 Routing Protocol


ICND2: Interconnecting Cisco Networking Devices (EXAM 200-101)

Small Network Implementation
a.Review Lab: Review of a Small Network Environment

Medium-Sized Switched Network Construction
a.Implementing VLANs and Trunks
b.Improving Performance with Spanning Tree
c.Routing Between VLANs
d.Securing the Expanded Network
e.Troubleshooting Switched Networks

Medium-Sized Routed Network Construction
a.Reviewing Routing Operations
b.Implementing VLSM

Single Area OSPF Implementation
a.Implementing OSPF
b.Troubleshooting OSPF

EIGRP Implementation
a.Implementing EIGRP
b.Troubleshooting EIGRP

Access Control Lists (ACLs)
a.ACL Operation
b.Configuring and Troubleshooting ACLs

Address Space Management
a.Scaling the Network with NAT and PAT
b.Transitioning to IPv6

LAN Extension into a WAN
a.Introducing VPN Solutions
b.Establishing a Point-to-Point WAN Connection with PPP
c.Establishing a WAN Connection with Frame Relay
d.Troubleshooting Frame Relay WANs